It's easy to say that WHY TITANIUM:
a,Corrosion Resistance - titanium is corrosion proof in all naturally occurring environments. The product was soaked in seawater for over four years without a hint of corrosion. We clean these blades in concentrated Hydrochloric acid.
b,Weight - titanium is 40%-50% lighter than steel.
c,Heat and Cold Stability - titanium is 800 degrees F more thermally stable than steel. Its thermal range is from -100 to over + 700 degrees F. It will not break in subzero weather; whereas, steel can shatter at -65 degrees F and ceramics are brittle at room temperatures.
d,Wear/Abrasion Resistance - titanium is a self-healing metal that forms a titanium oxide ceramic skin over itself when scratched and has 5 times the abrasion resistance of steel. This gives it the ability retain an edge and resist being eroded by contact with outside materials such as dirt, sand, ice, mud, nylon webbing, rope, etc.
e,Superior Ductility (Percent Elongation) - The deformation that results from the application of a tensile force, and is calculated as the change in length divided by the original length. This is usually measured over a 5cm gauge length. The higher the number the better the ductility. This is due to the 12% elongation, coupled with toughness and flexibility under load. It is the alloy of choice for jet landing gear
f,Toughness - titanium is tough at both high and low temperatures. Toughness is the relative resistance of the metal to breaking, cracking or chipping under impact or stress. Think of it as the opposite of brittleness. It should be noted that toughness and wear resistance are inversely proportional.
g,Flexibility - titanium may be flexed or bowed repeatedly without undergoing rupture. It has 1/2 of the modulus of steel; therefore, it will bend at least twice as far before breaking.
h,Non-Poisonous - titanium is non-poisonous and biologically inert. It is used as human replacement joints.
i,Strength-to-Weight Ratio - titanium has superior strength-to-weight ratios when compared to either steel or ceramic. It is the alloy of choice for aircraft.
j, Non Magnetic - QCTI’s titanium is magnetically inert.